Quick Lookups: Fluids

2013 Acura RDX 3.5L Eng VIN 3SECTION Fluids
FLUID CAPACITIES
Fluid Type Application Standard Metric Fluid Spec Note S/H
Air Cond Compressor Oil 2.30 OZS. 0.06 L PAG 46 S
Air Cond Refrigerant 1.05 LBS. 0.47 KG HFC-134a (R-134a) S
Automatic Transmission Fluid Drain and Refill 3.30 QTS. 3.12 L ACURA Automatic Transmission Fluid DW-1 Use only ACURA ATF DW-1 (automatic transmission fluid). Do not mix with other transmission fluid. Using transmission fluid other than ACURA DW-1 may cause deterioration in transmission operation and durability, and could result in damage to the transmission. S
Brake Fluid N/A N/A Heavy Duty DOT 3 Brake Fluid Use DOT 4 as a temporary replacement. S
Differential Gear Oil Drain and Refill,Rear 1.32 QTS. 1.24 L ACURA All-Wheel Drive Fluid (DPSF) S
Engine Coolant Drain and Refill 1.75 GALS. 6.62 L 50/50 mix of HONDA Long-Life Antifreeze/Coolant Type 2 and distilled water Includes: the coolant in the reserve tank and that remaining in the engine. S
Engine Oil Drain and Refill,w/Filter 4.55 QTS. 4.3 L Genuine ACURA Motor Oil API Premium-grade SAE 0W-20 Detergent Oil. You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade. S
Engine Oil Drain and Refill,w/o Filter 4.23 QTS. 4 L Genuine ACURA Motor Oil API Premium-grade SAE 0W-20 Detergent Oil. You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade. S
Fuel Tank 16.00 GALS. 60.56 L S
Transfer Case Fluid 0.43 QTS. 0.4 L ACURA Hypoid Gear Oil HGO-Type1 S
Windshield Washer Fluid 2.60 QTS. 2.46 L Use commercially-available windshield washer fluid only. S
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.