Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA2012TL BASEREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTWIPER/WASHER SYSTEMSWIPER SYSTEM / WASHER SYSTEMWIPER BLADE REPLACEMENT
2012 Acura TL Base
Wiper Blade Replacement
2012 Acura TL BaseSECTION Wiper Blade Replacement
- Lift the wiper arms from the windshield.NOTE: Lift the driver's side first.
- Press and hold the tab (A) and slide the wiper blade assembly (B) toward the tab to release it from the wiper arm (C).
- Slide the blade (A) out from the wiper blade holder (B).
- Install a new blade to the wiper blade holder in the reverse order of removal.
- Install the wiper blade assembly onto the wiper arms in the reverse order of removal.
- Check the wiper operation, if the blades slip, turn the wiper switch OFF, and reinstall the wiper blades securely.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.