SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA2012TL BASEREPAIR AND DIAGNOSIS (SINGLE PAGE)ACCESSORIES & EQUIPMENTENTERTAINMENT SYSTEMSAUDIO SYSTEMSYSTEM DESCRIPTIONAUDIO-NAVIGATION UNIT CONNECTOR C (14P)
2012 Acura TL Base

Audio-Navigation Unit Connector C (14P)

2012 Acura TL BaseSECTION Audio-Navigation Unit Connector C (14P)
Fig 1: Audio-Navigation Unit Connector C (14P) Connector End View
G08067838Courtesy of AMERICAN HONDA MOTOR CO., INC.
AUDIO-NAVIGATION UNIT CONNECTOR C (14P)

Cavity Wire Color Terminal Name Connects to
C1(3) YEL + B XM receiver
C2(3) LT BLU SYS ACC XM receiver
C3 GRY(1) GA-NET BUS SH Shield for terminals No. 9 and No. 10
C4 GRY(1) AUDIO SH Shield for terminals No. 5, No. 6, No. 13, and No. 14
C5 GRN AUDIO R+ AcuraLink® control unit (XM receiver)(2), XM receiver(3), HandsFreeLink control unit
C6 BLK AUDIO L+ AcuraLink® control unit (XM receiver)(2), XM receiver(3), HandsFreeLink control unit
C9 PNK GA-NET BUS+ AcuraLink® control unit (XM receiver)(2), XM receiver(3), HandsFreeLink control unit. Navigation display unit
C10 BLU GA-NET BUS- AcuraLink® control unit (XM receiver)(2), XM receiver(3), HandsFreeLink control unit, Navigation display unit
C11(3) BLK GND XM receiver
C13 WHT AUDIO R- AcuraLink® control unit (XM receiver)(2), XM receiver(3), HandsFreeLink control unit
C14 RED AUDIO L- AcuraLink® control unit (XM receiver)(2), XM receiver(3), HandsFreeLink control unit
(1) The shielded wires have a heat-shrink tube insulating the outside of the wire. The color of the insulating tube, typically black or dark gray, may not match the color of the wire listed on the circuit diagram.
(2) USA models
(3) Canada models
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.