Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA2011TSX SPORT WAGON L4-2.4LREPAIR AND DIAGNOSISSPECIFICATIONSMECHANICAL SPECIFICATIONSBODY AND FRAMESYSTEM SPECIFICATIONSEXTERIOR PARTS REMOVAL/INSTALLATION
2011 Acura TSX Sport Wagon L4-2.4L
Exterior Parts Removal/Installation
2011 Acura TSX Sport Wagon L4-2.4LSECTION Exterior Parts Removal/Installation
Exterior Parts Removal/Installation
NOTE:
- When adjusting the door in or out, replace the mounting bolts (A); refer to the appropriate Parts Catalog for the necessary adjusting bolts.
- Apply spot sealer to the mating surfaces, then install the front fenders, the hood, the doors, and the hinges.
- Check the hood, the doors, and the trunk positions; refer to the external parts fitting positions.
Sport wagon
NOTE:
- Apply spot sealer to the mating surface, then install the hinges.
- Check the tailgate position; refer to the external parts fitting positions.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.