Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA2011TSX SPORT WAGON L4-2.4LREPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSVARIABLE VALVE TIMING SOLENOIDSERVICE AND REPAIRROCKER ARM OIL CONTROL VALVE REMOVAL/INSTALLATION
2011 Acura TSX Sport Wagon L4-2.4L
Rocker Arm Oil Control Valve Removal/Installation
2011 Acura TSX Sport Wagon L4-2.4LSECTION Rocker Arm Oil Control Valve Removal/Installation
Rocker Arm Oil Control Valve Removal/Installation
1. Remove the frame brace Frame Brace Replacement.
2. Disconnect the rocker arm oil control solenoid connector (A) and the rocker arm oil pressure switch connector (B).
3. Remove the harness clamps (C) and the bolts (D).
4. Remove the rocker arm oil control valve assembly (E) and the rocker arm oil control valve filter (F).
5. Remove the engine wire harness brackets (A) from the rocker arm oil control valve (B).
6. Install the parts in the reverse order of removal with a new rocker arm oil control valve filter.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.