Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA2011TSX SPORT WAGON L4-2.4LREPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGCONTROL ASSEMBLYSERVICE AND REPAIRCLIMATE CONTROL UNIT REMOVAL/INSTALLATION
2011 Acura TSX Sport Wagon L4-2.4L
Climate Control Unit Removal/Installation
2011 Acura TSX Sport Wagon L4-2.4LSECTION Climate Control Unit Removal/Installation
Climate Control Unit Removal/Installation
1. Remove the passenger's dashboard trim Passenger's Dashboard Trim Removal/Installation.
2. Remove the center console panel Center Console Panel Removal/Installation.
3. Remove the driver's center trim and passenger's center trim Dashboard Center Trim Removal/Installation.
4. Remove the self-tapping screws. Disconnect the connectors (A), then remove the climate control unit (B).
5. If necessary, replace the bulbs (A).
6. Install the climate control unit in the reverse order of removal. After installation, operate the various functions to make sure they work properly.
7. Run the Self-Diagnostic Function to confirm that there are no problems in the system.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.