Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA2011TSX SPORT WAGON L4-2.4LREPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTNAVIGATION SYSTEMNAVIGATION DISPLAYSERVICE AND REPAIRNAVIGATION DISPLAY UNIT REMOVAL/INSTALLATION
2011 Acura TSX Sport Wagon L4-2.4L
Navigation Display Unit Removal/Installation
2011 Acura TSX Sport Wagon L4-2.4LSECTION Navigation Display Unit Removal/Installation
Navigation Display Unit Removal/Installation
SRS components are located in this area. Review the SRS component locations Locations and the precautions and procedures Service and Repair before doing repairs or service.
NOTE:
- Take care not to scratch the dashboard and display visor.
- When prying components, use the applicable KTC trim tool or equivalent.
- Put on gloves to protect your hands.
1. Remove the speaker cover Dashboard Speaker Cover Removal/Installation.
2. Carefully push out the navigation display unit (A).
3. Disconnect the connectors (B), and remove the navigation display unit.
4. Install the navigation display unit in the reverse order of removal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.