Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Cranks, But Does Not Start (With Keyless Access System)
2011 Acura TL FWD V6-3.5LSECTION Engine Cranks, But Does Not Start (With Keyless Access System)
Engine cranks, but does not start
Check for PGM-FI DTCs Initial Inspection and Diagnostic Overview.
Check the PGM-FI main relays Testing and Inspection.
Check for keyless access system symptom troubleshooting information Keyless Access System Symptom Troubleshooting Information.
Check the fuel pressure Testing and Inspection.
Check for a plugged or damaged fuel line Testing and Inspection.
Check for a plugged fuel filter.
Without SH-AWD Service and Repair
With SH-AWD Service and Repair
Check the throttle body Testing and Inspection.
Check for low engine compression.
Check for a damaged or broken timing belt.
Do the ECM/PCM reset in the PGM-FI INSPECTION menu to cancel ALL INJECTORS STOP with the HDS.
Also check for
Fuel level in tank
Also check for
Weak or fouled spark plugs
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.