Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DBβ LIVE
HOMESERVICE MANUALSACURA2010TL FWD V6-3.5LREPAIR AND DIAGNOSISTECHNICAL SERVICE BULLETINSALL TECHNICAL SERVICE BULLETINSCELL PHONE - PROGRAMMING (HFT) HFL CONTROL UNITSOVERVIEW
2010 Acura TL FWD V6-3.5L
Cell Phone - Programming (HFT) HFL Control Units: Overview
2010 Acura TL FWD V6-3.5LSECTION Overview
12-032
April 3, 2013
Applies To:
Acura Vehicles with Programmable HFL Control Units
Updating Programmable HFL (HFT) Control Units
(Supersedes 12-032, dated March 21, 2013, to revise the information marked by the black bars and asterisks)
REVISION SUMMARY
*Under the subheading HFL CONTROL UNIT UPDATE PROCEDURE, new images and text were added.*
The procedures in this service bulletin are used and referenced in other service bulletins.
This bulletin describes the procedure to update the software in programmable HandsFreeLink (HFL) control units.
This bulletin consists of two procedures:
^ Vehicles without Navigation.
^ Vehicles with Navigation.
This service bulletin also describes these subjects:
^ Required tools and equipment
^ Updating tips and precautions
^ Who to contact for questions or problems when using Acura-supplied updating equipment, including software and tools
NOTE:
Whenever you install a new HFL control unit, check that it has the latest software, and update it if needed.
WARRANTY CLAIM INFORMATION
Refer to the specific service bulletin for the symptom you are repairing.
QUESTIONS ABOUT THE UPDATING EQUIPMENT OR THE INTERACTIVE NETWORK
For questions about the software application, refer to the job aid titled Acura HFL (HFT) Control Unit Update User's Guide, available on ISIS.
For cellular phone compatibility listings or required settings, call JCI Technical Support.
For HFL PC software installation or Bluetooth pairing issues, call the iN Support Center.
For HFL module reprogramming (vehicle side) and general troubleshooting, call Tech Line.

Disclaimer
April 3, 2013
Applies To:
Acura Vehicles with Programmable HFL Control Units
Updating Programmable HFL (HFT) Control Units
(Supersedes 12-032, dated March 21, 2013, to revise the information marked by the black bars and asterisks)
REVISION SUMMARY
*Under the subheading HFL CONTROL UNIT UPDATE PROCEDURE, new images and text were added.*
The procedures in this service bulletin are used and referenced in other service bulletins.
This bulletin describes the procedure to update the software in programmable HandsFreeLink (HFL) control units.
This bulletin consists of two procedures:
^ Vehicles without Navigation.
^ Vehicles with Navigation.
This service bulletin also describes these subjects:
^ Required tools and equipment
^ Updating tips and precautions
^ Who to contact for questions or problems when using Acura-supplied updating equipment, including software and tools
NOTE:
Whenever you install a new HFL control unit, check that it has the latest software, and update it if needed.
WARRANTY CLAIM INFORMATION
Refer to the specific service bulletin for the symptom you are repairing.
QUESTIONS ABOUT THE UPDATING EQUIPMENT OR THE INTERACTIVE NETWORK
For questions about the software application, refer to the job aid titled Acura HFL (HFT) Control Unit Update User's Guide, available on ISIS.
For cellular phone compatibility listings or required settings, call JCI Technical Support.
For HFL PC software installation or Bluetooth pairing issues, call the iN Support Center.
For HFL module reprogramming (vehicle side) and general troubleshooting, call Tech Line.
Disclaimer
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- β’ You smell fuel, burning insulation, or see smoke.
- β’ Brakes feel soft, pull hard to one side, or make grinding noises.
- β’ The engine overheats, stalls repeatedly, or misfires under load.
- β’ You are missing required tools, torque specs, or safe lifting equipment.
- β’ You are not confident in the next step or safety outcome.