Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA2010TL FWD V6-3.5LREPAIR AND DIAGNOSISBODY AND FRAMEFRAMESTRUCTURAL BRACESERVICE AND REPAIR
2010 Acura TL FWD V6-3.5L
Structural Brace: Service and Repair
2010 Acura TL FWD V6-3.5LSECTION Service and Repair
Frame Brace Replacement
Strut Brace Replacement
1. Remove the cowl cover Service and Repair.
2. Disconnect the brake booster vacuum hose (A) from the strut brace (B).
3. Remove the bolts and the nuts from the top of the damper, and remove the strut brace.
4. Install the strut brace in the reverse order of removal.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.