Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA2010TL FWD V6-3.5LREPAIR AND DIAGNOSISACCESSORIES AND OPTIONAL EQUIPMENTANTITHEFT AND ALARM SYSTEMSALARM MODULESERVICE AND REPAIR
2010 Acura TL FWD V6-3.5L
Alarm Module: Service and Repair
2010 Acura TL FWD V6-3.5LSECTION Service and Repair
Immobilizer-Keyless Control Unit Replacement
1. Remove the steering column covers Service and Repair.
2. Disconnect the 7P connector (A) from the immobilizer-keyless control unit (B).
3. Remove the two screws and the immobilizer-keyless control unit.
4. Install the immobilizer-keyless control unit in the reverse order of removal.
5. After replacement, register the immobilizer-keyless control unit Programming and Relearning, and make sure the immobilizer system works properly.
6. Program all of the client's keys/keyless transmitters Programming and Relearning.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.