Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSACURA2008TSX AUTOMATICREPAIR AND DIAGNOSISBODY & FRAMEEXTERIOR/INTERIOR TRIMEXTERIOR TRIMFRONT GRILLE REPLACEMENT

2008 Acura TSX Automatic

Front Grille Replacement

2008 Acura TSX AutomaticSECTION Front Grille Replacement

NOTE:

When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damage.
Take care not to scratch the front bulkhead cover and front grille.

Remove the clips (A, B, C), then remove the front grille cover (D).

Fig 1: Removing Clips And Front Grille Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the front bumper, '04-05 models (see FRONT BUMPER REMOVAL/INSTALLATION ), '06-08 models (see '06-08 MODELS ).
Remove the clips, then remove the front grille (A). Take care not to drop the clips inside the front bumper.

Fig 2: Removing Clips And Front Grille
Courtesy of AMERICAN HONDA MOTOR CO., INC.
If necessary, remove the screws, then remove the front grille molding (A), center grille molding (B), emblem ring (C), emblem (D), from the front grille cover (E).

Fig 3: Removing Front Grille Molding, Center Grille Molding, Emblem Ring Emblem From Front Grille Cover
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install the front grille in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Install the hook portions of the front grille into place securely.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.