Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

SYS.OK|MANUAL.DB● LIVE

HOMESERVICE MANUALSACURA2008TSX AUTOMATICREPAIR AND DIAGNOSISACCESSORIES & EQUIPMENTWIPER/WASHER SYSTEMSWIPER SYSTEM & WASHER SYSTEMWIPER MOTOR REPLACEMENT

2008 Acura TSX Automatic

Wiper Motor Replacement

2008 Acura TSX AutomaticSECTION Wiper Motor Replacement

Open the hood. Remove the caps, nuts (A), and the windshield wiper arms (B).

Fig 1: Windshield Wiper Arms, Caps, Nuts, Hood Seals And Cowl Covers w/Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the hood seals (C) and cowl covers (D).
Disconnect the 5P connector (A) from the wiper motor.

Fig 2: Wiper Motor 5P Connector Terminal With Bolts w/Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Remove the four bolts (B) and wiper linkage assembly (C).
Scribe a line (A) across the link and windshield wiper linkage to show the original adjustment. Separate the windshield wiper linkage (B) from the wiper motor (C).

Fig 3: Separating Windshield Wiper Linkage From Wiper Motor w/Torque Specifications
Courtesy of AMERICAN HONDA MOTOR CO., INC.
Install in the reverse order to removal, and note these items:
- Apply multipurpose grease to the moving parts.
- Before reinstalling the wiper arms, turn the wiper switch ON, then OFF to return the wiper shafts to the park position.
- If necessary, replace any damaged clips.
- Check the wiper motor operation.

RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready Tools Free Quote Check Quote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

• You smell fuel, burning insulation, or see smoke.
• Brakes feel soft, pull hard to one side, or make grinding noises.
• The engine overheats, stalls repeatedly, or misfires under load.
• You are missing required tools, torque specs, or safe lifting equipment.
• You are not confident in the next step or safety outcome.