Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA2008MDXREPAIR AND DIAGNOSISBODY & FRAMEDOOR LOCKSOPENERSTAILGATE LATCH REPLACEMENTWITHOUT POWER TAILGATE
2008 Acura MDX
Without Power Tailgate
2008 Acura MDXSECTION Without Power Tailgate
- Put on gloves to protect your hands.
- If the tailgate latch can't be unlocked by using the keyless entry transmitter or the inside/outside tailgate switches, or by unlocking the driver's door lock, remove the maintenance lid (A) from the tailgate lower trim panel, then turn the emergency lever (B) clockwise as shown.
- Remove the tailgate lower trim panel (see TRIM REMOVAL/INSTALLATION - TAILGATE AREA ).
- Disconnect the tailgate latch switch connector (A) and tailgate actuator connector (B).
- Remove the bolts.
- Pull the tailgate latch (A) out, then remove it.
- Install the latch in the reverse order of removal, and note these items:
- Make sure the connectors are plugged in properly.
- Make sure the tailgate opens properly and looks securely. .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.