Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Enable Conditions
2008 Acura MDXSECTION Enable Conditions
ENABLE CONDITIONS CHART
| Condition | Minimum | Maximum |
|---|---|---|
| Elapsed time after starting the engine | 15 seconds | - |
| Engine coolant temperature | 156°F (69°C) | - |
| Intake air temperature | 19°F (-7°C) | - |
| MAP value | - | 74 kPa (22.0 in.Hg, 560 mmHg) |
| Battery voltage | 10.5 V | - |
| Fuel trim | 0.73 | 1.47 |
| Fuel feedback | Closed loop | |
| No active DTCs | P0107, P0108, P0112, P0113, P0117, P0118, P0122, P0123, P0171, P0172, P0174, P0175, P0201, P0202, P0203, P0204, P0204, P0205, P0206, P0222, P0223, P0300, P0301, P0302, P0303, P0304, P0305, P0306, P0351, P0352, P0353, P0354, P0355, P0356, P0401, P0403, P0404, P0496, P0497, P0511, P0627, P1109, P1128, P1129, P145C, P2101, P2118, P2122, P2123, P2127, P2128, P2135, P2138, P2176, P2227, P2228, P2229, P2413, P2646, P2647, P2648, P2649 | |
| Other | At idle | |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.