SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA20043.5RLREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSSHIFT INTERLOCK SYSTEMSREMOVAL & INSTALLATIONGEARSHIFT LEVER ASSEMBLYREMOVAL & INSTALLATION
2004 Acura 3.5RL

Removal & Installation

2004 Acura 3.5RLSECTION Removal & Installation
  1. Shift the transmission into the "N" position.
  2. Remove the center console. See CENTER CONSOLE .
  3. Disconnect the shift lock solenoid and park pin switch connectors. See Fig 1.
  4. Shift the transmission into "1" position.
  5. Remove the self-locking nut and shift cable end collar, then remove the shift cable from the shift lever link.
    6. CAUTION: Take care not to bend the shift cable.
  6. Remove shift lever mounting bolts (4).
  7. Remove the shift cable bracket (2) front the shift lever assembly, then remove the shift lever assembly.
  8. Install the shift lever assembly in the reverse order of removal.
Fig 1: Removing Shift Lever Assembly
G00079558Courtesy of AMERICAN HONDA MOTOR CO., INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.