Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA20043.5RLREPAIR AND DIAGNOSISTRANSMISSIONAUTOMATIC TRANSSERVICING - A/TREMOVAL AND INSTALLATIONSHIFT CABLE
2004 Acura 3.5RL
Shift Cable
2004 Acura 3.5RLSECTION Shift Cable
WARNING:
Ensure lifts, jacks, and safety stands are placed properly. Apply the parking brake, and block the rear wheels so the vehicle will not roll off the stands.
- Raise the front of the vehicle, and support it with safety stands.
- Set the parking brake, and block both rear wheels securely.
- Shift the transaxle into the Neutral position.
CAUTION:
When prying with a flat-tip screwdriver, wrap it with protective tape to prevent damages.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.