Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Navigation System DVD Handling Tips (ASN0806-05)
2004 Acura 3.5RLSECTION Navigation System DVD Handling Tips (ASN0806-05)
Publication date: 2006-08-01
Reference number: ASN0806-05
Navigation System DVD Handling Tips
Reference number: ASN0806-05
Navigation System DVD Handling Tips
ACURA SERVICE NEWS
Reference Number(s): ASN0806-05, Date of Issue:
August 1, 2006
| ACURA: | 2001-07 MDX, 2000-07 RL, 2004-07 TL and TSX |
| CATEGORY: | Acura Service News |
| APPLIES TO: | 2001-07 MDX, 2000-07 RL, 2004-07 TL and TSX with Navigation System |
SERVICE INFORMATION
Navigation system DVDs can be easily scratched or damaged if you don't handle them properly, and they're not exactly cheap to replace. So here are some important handling tips you need to remember:
- Don't eject the DVD from the navigation unit unless you really need to. The drive is simply not designed to load and eject disks again and again.
- Always handle the DVD by its edges or by its center hole. Never touch the media side (the side that's opposite the label). Fingerprints smudge the DVD's surface, making it hard for the navigation unit to read the disk.
- After you eject the DVD, make sure you identify it with the VIN and store it in a plastic jewel case or an envelope. With some navigation units, if you load a navigation DVD that's got the wrong software version (for example, an '06 version in a '05 vehicle), you're loading software that can't be removed. Also, loading the wrong color DVD (for example, an orange one instead of a white one) can result in an error message or cause symptoms that can be mistaken for a navigation hardware problem.
- For more info about navigation system DVDs, check out S/B 05-018, NAVIGATION SYSTEM INFORMATION AND DVD INFORMATION AND INSPECTION .
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.