Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Oil Replacement Reminder Reset - Procedure 05
2004 Acura 3.5RLSECTION Engine Oil Replacement Reminder Reset - Procedure 05
NOTE:
The engine oil life and maintenance item(s) can be independently reset with an appropriate scan tool. See Resetting Individual Maintenance Items in Procedure 08.
- Set the power mode to ON.
- Select the Vehicle Settings screen by rolling the right multi-function steering wheel controler (selector wheel on right side of steering wheel), and then push it. Go to Vehicle Settings > Maintenance Info.
- Push the multi-function steering-wheel control. The oil life reset mode is displayed on the MID.
- Select Reset with the multi-function steering-wheel control, then push the multi-function steering wheel control. The displayed maintenance items disappear, and the engine oil life display returns to 100%.
NOTE:
To cancel the oil life reset mode, select Cancel, then push the multi-function steering-wheel control.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.