Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Deflection Method
2004 Acura 3.5RLSECTION Deflection Method
- Apply a force of 22 lbs. (98 N), and measure the deflection between the power steering pump and the crankshaft pulleys.
- Adjust belt to specifications. See POWER STEERING BELT ADJUSTMENT - DEFLECTION METHOD .
- Remove the air cleaner.
- Loosen the power steering pump mounting nut and bolt.
- Turn the adjusting bolt to get the proper belt tension, then retighten the nut and bolt.
- Start the engine and turn the steering wheel from lock-to-lock several times, then stop the engine and recheck the deflection of the belt.
- Install the air cleaner.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.