Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Engine Oil Replacement Reminder Reset - Procedure 03
2004 Acura 3.5RLSECTION Engine Oil Replacement Reminder Reset - Procedure 03
- Turn ignition switch to ON (II) position.
- If engine oil life minder is not displayed, press the SEL/RESET button on steering wheel repeatedly until oil life minder is displayed.
- Press and hold the SEL/RESET button for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi-information display.
- Press the UP or DOWN arrow buttons on steering wheel to select RESET, and press SEL/RESET button. The maintenance item code(s) will disappear, and the engine oil life will reset to 100.
- To cancel resetting the oil life reset mode, press the UP or DOWN arrow buttons to select CANCEL, and press SEL/RESET button.NOTE: If you do not complete the reset procedure within 30 seconds after selecting the reset mode, the mode will be canceled automatically.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.