Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
HO2S Heater Monitor Code
2004 Acura 3.5RLSECTION HO2S Heater Monitor Code
WARNING: This page is about a different car, the 2003 Acura 3.2TL and 2003 Acura 3.2CL. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When negative battery cable is disconnected, all readiness codes are cleared.
- Connect scan tool to DLC.
- Start engine and let idle for 10 minutes.
- Check for readiness code with scan tool.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.