Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Oil Pressure Switch
Disconnect Yellow/Red wire from oil pressure switch. Switch is located at base of oil filter. With engine off, continuity should exist between oil pressure switch terminal and ground. Continuity should not exist with engine running. If oil pressure switch does not function as specified, ensure oil level and oil pressure are okay. See appropriate 3.5L article in ENGINES. If oil level and oil pressure are okay, replace oil pressure switch.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.