Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA20043.5RLREPAIR AND DIAGNOSISELECTRICALGAUGESINSTRUMENT PANELCOMPONENT TESTSMAINTENANCE REMINDER LIGHT
2004 Acura 3.5RL
Maintenance Reminder Light
2004 Acura 3.5RLSECTION Maintenance Reminder Light
- Turn ignition switch to ON position. Maintenance Reminder Light (MAINTE REQUID) should illuminate for 2 seconds (bulb check). Between 6000-7500 miles, light will illuminate for 2 seconds (bulb check) and then flash for 10 seconds. If maintenance reminder is not reset before 7500 miles, light will stay on steady for 10 seconds. If light flashes or stays on, vehicle maintenance should be performed and maintenance reminder light reset.
- To reset maintenance reminder light, turn ignition switch to ON position. Press and hold SELECT switch button and RESET switch button for more than 10 seconds. If maintenance reminder light does not operate as described, check speedometer operation and bulb. If bulb and speedometer are okay, check instrument cluster printed circuit board.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.