Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Description & Operation: Notes
Vehicle Stability Assistance (VSA) system works by controlling brake pressure, engine power or both to help maintain traction. VSA will reduce engine power and/or apply brakes to reduce front or rear side slip. The system works in conjunction with TCS (traction control) and ABS braking systems. If vehicle enters a corner and conditions are such that it begins to spin out (over steer), VSA automatically helps correct the problem by applying brakes to the outside front wheel. The potential for spin is reduced and puts the vehicle back on track. Also, if road conditions cause vehicle to slip sideways (under steer), VSA will decrease engine power to correct the problem. If side slip is not reduced, VSA will apply brakes to the inside front wheel to help turn the car back onto its intended course.
NO RELATED
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.