SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA20043.5RLREPAIR AND DIAGNOSISBODY & FRAMEPOWER SEATSREMOVAL & INSTALLATIONFRONT SEATSDISASSEMBLY & REASSEMBLY
2004 Acura 3.5RL

Disassembly & Reassembly

2004 Acura 3.5RLSECTION Disassembly & Reassembly
NOTE: First remove seat from vehicle.

For disassembly, see Fig 1 , Fig 2 or Fig 3 . To reassemble, reverse disassembly procedure. When reassembling, make sure the seat wire harness and connectors are installed correctly. See Fig 4 -Fig 7 .

Fig 1: Disassembling Driver Seat (With Power Lumbar Support)
G00280537Courtesy of AMERICAN HONDA MOTOR CO., INC.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.