Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
Disc Brakes Service Specifications
2003 Acura 3.2CL BaseSECTION Disc Brakes Service Specifications
DISC BRAKE SPECIFICATIONS
| Application | In. (mm) | ||||||
|---|---|---|---|---|---|---|---|
| Brake Disc | |||||||
| Parallelism | .0006 (.015) | ||||||
| Maximum Runout | (1) .004 (.10) | ||||||
| Standard Thickness | |||||||
| Front | 1.10-1.11 (27.9-28.1) | ||||||
| Rear | .350-.358 (8.9-9.1) | ||||||
| Minimum Refinish Thickness (2) | |||||||
| Front | 1.02 (26.0) | ||||||
| Rear | .30 (7.5) | ||||||
| Parking Brake Drum (Rear) | |||||||
| Diameter | |||||||
| Standard | 6.689-6.693 (169.9-170.0) | ||||||
| Service Limit | 6.732 (171.0) | ||||||
| Lining Thickness | |||||||
| Standard | .075-.098 (1.9-2.5) | ||||||
| Service Limit | .04 (1.0) | ||||||
| Disc Pad Standard Thickness | |||||||
| Front | .41-.45 (10.5-11.5) | ||||||
| Rear | .33-.37 (8.5-9.5) | ||||||
| Limit | .06 (1.6) | ||||||
|
|||||||
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.