SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA1998INTEGRA RS, AUTOMATICREPAIR AND DIAGNOSISEXTERNAL PAGESDIFFERENT CARSECTION 49 (COMPUTER RELEARN PROCEDURES)VOLKSWAGENPASSATECM PROGRAMMING (2.8L V6 ENGINE)
1998 Acura Integra RS, Automatic

ECM Programming (2.8L V6 Engine)

1998 Acura Integra RS, AutomaticSECTION ECM Programming (2.8L V6 Engine)
WARNING: This page does not describe the selected car, but rather 162 other vehicles, including the 2001 Volvo V70, 2001 Volvo V40, 2001 Volvo S80, 2001 Volvo S60, and 2001 Volvo S40. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect Scan Tool (VAG 1551/1552) to data link connector. Turn ignition on. Press 0 and 1 buttons to select ENGINE ELECTRONICS. Press 1 and 1 buttons to select LOGIN PROCEDURE FUNCTION 11. Press "Q" to confirm input. Press 0, 1, 2, 8 and 3 to input log-in code. Press "Q" to confirm input. Press 0 and 7 buttons to select CODE CONTROL MODULE. Press "Q" to confirm input.
  2. Enter appropriate vehicle code, 00000 for manual transmission equipped vehicles, 00001 for automatic transmission equipped vehicles. Press right arrow button. Press 0 and 6 buttons to select END OUTPUT. Press "Q" to confirm input. Turn ignition off.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

Shop Manual-Ready ToolsFree Quote CheckQuote Shield Pro

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • • You smell fuel, burning insulation, or see smoke.
  • • Brakes feel soft, pull hard to one side, or make grinding noises.
  • • The engine overheats, stalls repeatedly, or misfires under load.
  • • You are missing required tools, torque specs, or safe lifting equipment.
  • • You are not confident in the next step or safety outcome.