Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA1998INTEGRA RS, AUTOMATICREPAIR AND DIAGNOSIS (SINGLE PAGE)MAINTENANCEPROCEDURESMAINTENANCE REMINDER LIGHT (RESET PROCEDURES)ENGINE OIL REPLACEMENT REMINDERENGINE OIL REPLACEMENT REMINDER RESET - PROCEDURE 06RESETTING THE MAINTENANCE MINDER
1998 Acura Integra RS, Automatic
Resetting the Maintenance Minder
1998 Acura Integra RS, AutomaticSECTION Resetting the Maintenance Minder
NOTE:
- The vehicle must be stopped to reset the Maintenance Minder.
- If a required service is done and the Maintenance Minder is not reset, or if the Maintenance Minder is reset without doing the service, the system will not show the proper maintenance timing. This can lead to serious mechanical problems because there will be no accurate record of when the required maintenance is needed.
- The engine oil life and maintenance item(s) can be independently reset with the HDS.
- You can reset the engine oil life display using the audio/information screen.
- Turn the vehicle to the ON mode.
- Select the "Vehicle Settings" or "Maintenance" screen by rolling the right multi-fanction steering wheel controler, and then push it.
- Select "Maintenance Info." using the right multi-fanction steering wheel controler, then push it. The "Maintenance Reset" oil life reset mode is appears on the multi-information display.NOTE:
- If you are resetting the Maintenance Minder when the engine oil life is more than 15 %, make sure any maintenance item(s) requiring service are done before resetting the display.
- To cancel the oil life reset mode, select "Cancel" then push the right multi-fanction steering wheel controler.
- Scroll with the right multi-fanction steering wheel controller to select "Reset" then push it. The maintenance item code(s) will disappear, and the engine oil life will reset to "100 %."
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.