Fluid Capacities

1998 Acura Integra RS, AutomaticSECTION Fluid Capacities
FLUID CAPACITIES

Application Quantity
Automatic Transaxle (1)
Integra
Fluid Change 2.9 Qts. (2.7L)
Overhaul 6.2 Qts. (5.9L)
2.3CL
Fluid Change 2.5 Qts. (2.4L)
Overhaul 6.3 Qts. (6.0L)
2.5TL
Fluid Change 2.9 Qts. (2.7L)
Overhaul 7.6 Qts. (7.2L)
3.0CL
Fluid Change 3.0 Qts. (2.8L)
Overhaul 7.5 Qts. (7.1L)
3.2TL
Fluid Change 3.5 Qts. (3.3L)
Overhaul 9.2 Qts. (8.7L)
3.5RL
Fluid Change 3.2 Qts. (3.0L)
Overhaul 9.1 Qts. (8.6L)
Cooling System (2) (Includes Heater)
Integra
B18B1 Engine (A/T) 5.0 Qts. (4.7L)
B18B1 Engine (M/T) 4.6 Qts. (4.4L)
B18C1 Engine 5.0 Qts. (4.7L)
B18C5 Engine 4.8 Qts. (4.5L)
2.3CL
(A/T) 5.7 Qts. (5.4L)
(M/T) 5.6 Qts. (5.3L)
2.5TL 5.5 Qts. (5.2L)
3.0CL 5.6 Qts. (5.3L)
3.2TL 3.4 Qts. (3.2L)
3.5RL 6.4 Qts. (6.1L)
Crankcase (Includes Filter)
Integra
B18B1 Engine 4.0 Qts. (3.8L)
B18C1, B18C5 4.2 Qts. (4.0L)
2.3CL 4.5 Qts. (4.3L)
2.5TL 4.5 Qts. (4.3L)
3.0CL 4.6 Qts. (4.4L)
3.2TL 5.0 Qts. (4.7L)
3.5RL 4.9 Qts. (4.6L)
Differential (3) 1.1 Qts. (1.0L)
Manual Transaxle (4)
Integra 2.3 Qts. (2.2L)
2.5TL 1.0 Qts. (.95L)
(1) Manufacturer recommends Honda ATF or DEXRON III.
(2) Drain and refill capacity.
(3) Except Integra, 2.3CL and 3.0CL, which have an integral transaxle/differential.
(4) Manufacturer recommends Honda MTF.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.