Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA1998CL V6-3.0L SOHC (VTEC)REPAIR AND DIAGNOSISHEATING AND AIR CONDITIONINGSPECIFICATIONS
1998 Acura CL V6-3.0L SOHC (VTEC)
Heating and Air Conditioning: Specifications
1998 Acura CL V6-3.0L SOHC (VTEC)SECTION Specifications
| Discharge hose to compressor | 9.8 Newton Meter (Nm) |
| Discharge hose to condenser | 9.8 Newton Meter (Nm) |
| Condenser line to condenser | 9.8 Newton Meter (Nm) |
| Consenser line to receiver/drier | 13 Newton Meter (Nm) |
| Receiver line to receiver/drier | 13 Newton Meter (Nm) |
| Receiver line to evaporator | 13 Newton Meter (Nm) |
| Suction line to evaporator | 31 Newton Meter (Nm) |
| Suction hose to suction line | 31 Newton Meter (Nm) |
| Suction hose to compressor | 9.8 Newton Meter (Nm) |
| Compressor to compressor bracket | 22 Newton Meter (Nm) |
| Compressor backet to cylinder block | 49 Newton Meter (Nm) |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.