Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA1998CL V6-3.0L SOHC (VTEC)REPAIR AND DIAGNOSISBRAKES AND TRACTION CONTROLSPECIFICATIONS
1998 Acura CL V6-3.0L SOHC (VTEC)
Brakes and Traction Control: Specifications
1998 Acura CL V6-3.0L SOHC (VTEC)SECTION Specifications
THICKNESS
Front:
Standard 24.9 - 25.1 mm (0.98 - 0.99 inch)
Service Limit 23.0 mm (0.91 inch)
Rear:
Standard 9.9 - 10.1 mm (0.39 - 0.40 inch)
Service Limit 8.0 mm (0.31 inch)
RUNOUT
Front 0.10 mm (0.004 inch)
Rear 0.10 mm (0.004 inch)
PARALLELISM
Front And Rear 0.015 mm (0.0006 inch)
TORQUE SPECIFICATIONS
Retaining Screws 9.8 Nm (84 inch lbs.)
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.