Cold Fast Idle Too Low

1998 Acura 3.5RL Special EditionSECTION Cold Fast Idle Too Low
  • Check Idle Air Control (IAC) valve. See DTC P1508 or P1519 in TESTS W/CODES articles below:
  • For Integra, see TESTS W/CODES article.
  • For 2.3CL, see TESTS W/CODES article.
  • For 2.5CL, see TESTS W/CODES article.
  • For 3.0CL, see TESTS W/CODES article.
  • For 3.2TL, see TESTS W/CODES article.
  • For 3.5RL, see TESTS W/CODES article.
  • Check fast idle thermo valve. See VACUUM DIAGRAMS article.
  • Check idle speed adjustment. See ADJUSTMENTS article.
  • Check Intake Air Temperature (IAT) sensor. See DTC P0111, P0112 or P0113 in TESTS W/CODES articles below:
  • For Integra, see TESTS W/CODES article.
  • For 2.3CL, see TESTS W/CODES article.
  • For 2.5CL, see TESTS W/CODES article.
  • For 3.0CL, see TESTS W/CODES article.
  • For 3.2TL, see TESTS W/CODES article.
  • For 3.5RL, see TESTS W/CODES article.
  • Check air cleaner.
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • β€’ You smell fuel, burning insulation, or see smoke.
  • β€’ Brakes feel soft, pull hard to one side, or make grinding noises.
  • β€’ The engine overheats, stalls repeatedly, or misfires under load.
  • β€’ You are missing required tools, torque specs, or safe lifting equipment.
  • β€’ You are not confident in the next step or safety outcome.