Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA19983.5RL SPECIAL EDITIONREPAIR AND DIAGNOSIS (SINGLE PAGE)ELECTRICALCOMPONENT LOCATIONSELECTRICAL COMPONENT LOCATORCIRCUIT PROTECTION DEVICES
1998 Acura 3.5RL Special Edition
Circuit Protection Devices
1998 Acura 3.5RL Special EditionSECTION Circuit Protection Devices
CIRCUIT PROTECTION DEVICES
| Component | Component Location |
|---|---|
| A/T Reverse Diode | Behind blower unit, taped to harness. |
| Seat Belt Tensioner Diodes (2) | Below respective side of rear trim. |
| Underdash Fuse/Relay Box | Behind left kick panel. See Figure . |
| Underhood Fuse/Relay Box | On left side of engine compartment. See Figure . |
| Underhood Relay Box "A" | On left front of engine compartment. See Figure . |
| Underhood Relay Box "B" | On right rear corner of engine compartment. See Figure . |
| Underhood Relay Box "C" | On left front of engine compartment. See Figure . |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.