Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA19972.2CL STANDARDREPAIR AND DIAGNOSISHEATING, VENTILATION & A/C (HVAC)HVAC CONTROL SYSTEMSA/C-HEATER SYSTEM - AUTOMATICTESTINGEVAPORATOR TEMPERATURE SENSOR
1997 Acura 2.2CL Standard
Evaporator Temperature Sensor
1997 Acura 2.2CL StandardSECTION Evaporator Temperature Sensor
CAUTION:
To avoid damage to sensor, use an ohmmeter with a measuring current of one milliamp or less.
Unplug connector from evaporator temperature sensor. Measure sensor resistance at specified temperatures. See EVAPORATOR TEMPERATURE SENSOR RESISTANCE table. If resistance is not as specified, replace sensor.
EVAPORATOR TEMPERATURE SENSOR RESISTANCE
| Temperature °F (°C) | Ohms |
|---|---|
| 32 (0) | 3000 |
| 50 (10) | 1850 |
| 68 (20) | 1300 |
| 86 (30) | 850 |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.