Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA19972.2CL STANDARDREPAIR AND DIAGNOSIS (SINGLE PAGE)GENERAL INFORMATIONDRIVELINE/AXLESMAP - DRIVE TRAIN & TRANSMISSIONDRIVETRAIN AND TRANSMISSIONPRESSURE PLATES
1997 Acura 2.2CL Standard
Pressure Plates
1997 Acura 2.2CL StandardSECTION Pressure Plates
| Condition | Code | Procedure |
|---|---|---|
| Balance weight missing | C | Require replacement |
| Broken | A | Require replacement |
| Contact surface distorted | B | Require replacement |
| Cracks | B | Require replacement |
| Fingers bent | A | Require replacement |
| Hard spots | B | Require replacement |
| Scored | B | Require replacement |
| Spring rate less than specifications | B | Require replacement |
| Worn beyond specifications | B | Require replacement |
| Worn close to the end of its useful life | 1 | Suggest replacement |
| Worn, affecting performance | A | Require replacement |
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.