Mode $06 Test ID by Model

1997 Acura 2.2CL StandardSECTION Mode $06 Test ID by Model
Mode $06 Test ID by Model

Monitor Test ID Test Limit Type and Comp. ID 2.5 TL 3.2 TL 3.5 RL NSX Integra 3.0 CL 2.2 CL
EGR Flow Rate $01 $80   X X X   X X
$02 $80 X            
Catalyst (Bank 1) $04 $02              
$05/$06 $81/$81              
$06 $80   X X X X X X
$08/$09 $80/$80 X            
Catalyst (Bank 2) $07 $80       X      
$07/$0A $81/$81              
PHO2S Heater (Bank1) $10/$11 $80/$00   X X   X X X
$10/$11 $81/$01       X      
$10/$11 $82/$02 X            
$10/$11 $84/$04              
$10/$11 $85/$05              
$10/$11 $86/$06              
$10/$11 $87/$07              
PHO2S Heater (Bank 2) $12/$13 $81/$01   X X X      
$12/$13 $85/$05              
$12/$13 $86/$06              
SHO2S Heater (Bank 1) $18/$19 $80$00         X X X
$18/$19 $81/$01   X X X      
$18/$19 $83/$03 X            
$18/$19 $85/$05              
$18/$19 $86/$06              
$18/$19 $87/$07              
$18/$19 $88/$08              
SHO2S Heater (Bank 2) $1A/$1B $81/$01   X X X      
$1A/$1B $86/$06              
EVAP System for tank leak check $21/$23/$24/$25/$26 $80/$00/$00/$80/$80   X X X   X X
$21/$26/$27 $81/$81/$81              
$21/$26/$27/$38/$3A/$3B/$3C $82/$82/$82/$02/$82/$82/$02              
$28/$2A/$2B $80/$80/$00   X X X   X X
EVAP System for canister leak check $29/$2D/$2E/$2F $81/$01/$81/$81              
$29/$2D/$2E/$2F/$3E $82/$02/$82/$82/$82              
$2C/$2D/$2E/$2F $80/$80/$00/$00   X X X   X X
EVAP System leak check $51/$52/$53/$54/$55/$56 $80/$00/$80/$00/$00/$80 X            
RENDER: 1.0x

NO RELATED

Recommended Tools & Savings

Use the Manual With the Right Hardware

Pair factory procedures with proven DIY tools so the instructions are easier to execute.

Affiliate disclosure: We may earn a commission at no extra cost to you.

When to See a Mechanic

Stop DIY work and contact a certified mechanic immediately if any of the following apply:

  • You smell fuel, burning insulation, or see smoke.
  • Brakes feel soft, pull hard to one side, or make grinding noises.
  • The engine overheats, stalls repeatedly, or misfires under load.
  • You are missing required tools, torque specs, or safe lifting equipment.
  • You are not confident in the next step or safety outcome.