Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA1994INTEGRA (GS-R) L4-1797CC 1.8L DOHC (VTEC)REPAIR AND DIAGNOSISPOWERTRAIN MANAGEMENTCOMPUTERS AND CONTROL SYSTEMSRELAYS AND MODULES - COMPUTERS AND CONTROL SYSTEMSBODY CONTROL MODULEDIAGRAMSDIAGNOSTIC AIDSDAMAGE PRECAUTIONSELECTRICAL PRECAUTIONSBATTERY PRECAUTIONS
1994 Acura Integra (GS-R) L4-1797cc 1.8L DOHC (VTEC)
Battery Precautions
1994 Acura Integra (GS-R) L4-1797cc 1.8L DOHC (VTEC)SECTION Battery Precautions
CAUTION:
- Never use a booster/starter which has a voltage rating above 12 volts to start engine.
- Always ensure the battery is properly connected to the vehicle prior to attempting to start engine.
- Don't disconnect the battery when the engine is running.
- When charging a battery, be sure battery cables are disconnected.
- The battery contains acid and produces explosive gas (hydrogen). Avoid creating sparks near battery.
- Never use a booster/starter which has a voltage rating above 12 volts to start engine.
- Always ensure the battery is properly connected to the vehicle prior to attempting to start engine.
- Don't disconnect the battery when the engine is running.
- When charging a battery, be sure battery cables are disconnected.
- The battery contains acid and produces explosive gas (hydrogen). Avoid creating sparks near battery.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.