Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
SYS.OK|MANUAL.DB● LIVE
HOMESERVICE MANUALSACURA1994INTEGRA (GS-R) L4-1797CC 1.8L DOHC (VTEC)REPAIR AND DIAGNOSISBODY AND FRAMESERVICE PRECAUTIONS
1994 Acura Integra (GS-R) L4-1797cc 1.8L DOHC (VTEC)
Body and Frame: Service Precautions
1994 Acura Integra (GS-R) L4-1797cc 1.8L DOHC (VTEC)SECTION Service Precautions
Before beginning work:
Disconnect the battery to reduce the possibility of fire caused by electrical shorts.
Check for fuel leaks and repair as necessary.
Remove the fuel tank and/or fuel lines if welding equipment is to be used near the fuel system.
Before welding, sanding or cutting, protect carpets and seats with fire-proof covers.
Follow standard safety practices when using toxic or flammable liquids.
Use standard safety equipment when spraying paint, welding, cutting, sanding or grinding. Standard safety equipment includes:
Respirator and filter masks - Designed to filter out toxic fumes, mist, dust or other airborne particles. Use a respirator or filter mask designed to protect you from the hazards of the particular job; some respirators, for example, are designed to filter out only dust and airborne particles, not toxic fumes.
Safety goggles or glasses - Designed to protect your eyes from projectiles, dust particles or splashing liquid.
Gloves - Rubber gloves protect against corrosive chemicals. Welding gloves protect against burns and abrasions caused by welding, sanding or grinding.
Safety shoes - Non-slip soles protect against slipping. Metal toe inserts protect against falling objects.
Ear plugs - Protect eardrums from harmful noise levels.
During work:
Do not smoke while working near the fuel system.
Deposit gas or solvent-soaked shop towels in an approved container.
Always attach a safety cable when using a hydraulic ram or a frame straightening table; do not stand in direct line with the chains used on such equipment.
Disconnect the battery to reduce the possibility of fire caused by electrical shorts.
Check for fuel leaks and repair as necessary.
Remove the fuel tank and/or fuel lines if welding equipment is to be used near the fuel system.
Before welding, sanding or cutting, protect carpets and seats with fire-proof covers.
Follow standard safety practices when using toxic or flammable liquids.
Use standard safety equipment when spraying paint, welding, cutting, sanding or grinding. Standard safety equipment includes:
Respirator and filter masks - Designed to filter out toxic fumes, mist, dust or other airborne particles. Use a respirator or filter mask designed to protect you from the hazards of the particular job; some respirators, for example, are designed to filter out only dust and airborne particles, not toxic fumes.
Safety goggles or glasses - Designed to protect your eyes from projectiles, dust particles or splashing liquid.
Gloves - Rubber gloves protect against corrosive chemicals. Welding gloves protect against burns and abrasions caused by welding, sanding or grinding.
Safety shoes - Non-slip soles protect against slipping. Metal toe inserts protect against falling objects.
Ear plugs - Protect eardrums from harmful noise levels.
During work:
Do not smoke while working near the fuel system.
Deposit gas or solvent-soaked shop towels in an approved container.
Always attach a safety cable when using a hydraulic ram or a frame straightening table; do not stand in direct line with the chains used on such equipment.
RENDER: 1.0x
NO RELATED
Recommended Tools & Savings
Use the Manual With the Right Hardware
Pair factory procedures with proven DIY tools so the instructions are easier to execute.
Affiliate disclosure: We may earn a commission at no extra cost to you.
When to See a Mechanic
Stop DIY work and contact a certified mechanic immediately if any of the following apply:
- • You smell fuel, burning insulation, or see smoke.
- • Brakes feel soft, pull hard to one side, or make grinding noises.
- • The engine overheats, stalls repeatedly, or misfires under load.
- • You are missing required tools, torque specs, or safe lifting equipment.
- • You are not confident in the next step or safety outcome.