Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Ford ExplorerOil Type & Capacity
OEM spec from the factory service manual for the Base, 2.3L Eng VIN H, 4WD variant.
Quick Answer
Oil Type
MOTORCRAFT SAE 5W-30 Synthetic Blend Motor Oil
Capacity (w/ Filter)
5.20 QTS.
4.92 L
Variant
Base, 2.3L Eng VIN H, 4WD
Note: To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
Source: Factory service manual — 2020 Ford Explorer Base, 2.3L Eng VIN H, 4WD. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 2020 Ford Explorer take?
- The 2020 Ford Explorer requires MOTORCRAFT SAE 5W-30 Synthetic Blend Motor Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, 2.3L Eng VIN H, 4WD configuration.
- How much oil does a 2020 Ford Explorer need?
- The 2020 Ford Explorer takes 5.20 QTS. (4.92 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2020 Ford Explorer?
- Yes — synthetic oil that meets the MOTORCRAFT SAE 5W-30 Synthetic Blend Motor Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2020 Ford Explorer?
- Using oil that does not meet the MOTORCRAFT SAE 5W-30 Synthetic Blend Motor Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.