Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2020 Ford ExplorerCoolant Type & Capacity
OEM spec from the factory service manual for the Base, 2.3L Eng VIN H, 4WD variant.
Quick Answer
Coolant Type
MOTORCRAFT Yellow Prediluted Antifreeze/Coolant
Capacity
14.05 QTS.
13.29 L
Variant
Base, 2.3L Eng VIN H, 4WD
Source: Factory service manual — 2020 Ford Explorer Base, 2.3L Eng VIN H, 4WD. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of coolant does a 2020 Ford Explorer take?
- The 2020 Ford Explorer requires MOTORCRAFT Yellow Prediluted Antifreeze/Coolant. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, 2.3L Eng VIN H, 4WD configuration.
- How much coolant does a 2020 Ford Explorer hold?
- The 2020 Ford Explorer cooling system capacity is 14.05 QTS. (13.29 L).
- Can I use universal coolant in my 2020 Ford Explorer?
- It is strongly recommended to use coolant that meets the MOTORCRAFT Yellow Prediluted Antifreeze/Coolant specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2020 Ford Explorer?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.