Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2019 Ford F-150Oil Type & Capacity
OEM spec from the factory service manual for the King Ranch, 3.0L Eng VIN 1, 4WD variant.
Quick Answer
Oil Type
$MOTORCRAFT SAE 5W-30 Diesel Motor Oil
Capacity (w/ Filter)
6.50 QTS.
6.15 L
Variant
King Ranch, 3.0L Eng VIN 1, 4WD
Note: For severe duty service, use SAE 5W-40 API FA-4. For bio-diesel fuel blends (B20 max), use SAE 5W-40 API FA-4.
Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.
This vehicle's factory manual
2019 Ford F-150: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2019 Ford F-150
Frequently Asked Questions
- What type of oil does a 2019 Ford F-150 take?
- The 2019 Ford F-150 requires MOTORCRAFT SAE 5W-30 Diesel Motor Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the King Ranch, 3.0L Eng VIN 1, 4WD configuration.
- How much oil does a 2019 Ford F-150 need?
- The 2019 Ford F-150 takes 6.50 QTS. (6.15 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2019 Ford F-150?
- Yes — synthetic oil that meets the MOTORCRAFT SAE 5W-30 Diesel Motor Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2019 Ford F-150?
- Using oil that does not meet the MOTORCRAFT SAE 5W-30 Diesel Motor Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.