2019 Ford F-150Coolant Type & Capacity

OEM spec from the factory service manual for the King Ranch, 3.0L Eng VIN 1, 4WD variant.

Quick Answer

Coolant Type

Vehicles Built on or before 31-December-2018: MOTORCRAFT Orange Antifreeze/Coolant Prediluted. Vehicles Built on of after 01-January-2019: MOTROCRAFT Yellow Antifreeze/Coolant Prediluted.

Capacity

13.70 QTS.

12.96 L

Variant

King Ranch, 3.0L Eng VIN 1, 4WD

Note: Indicates only approximate dry fill capacity. Some applications may vary.

This vehicle's factory manual

2019 Ford F-150: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

Related for Your 2019 Ford F-150

Frequently Asked Questions

What type of coolant does a 2019 Ford F-150 take?
The 2019 Ford F-150 requires Vehicles Built on or before 31-December-2018: MOTORCRAFT Orange Antifreeze/Coolant Prediluted. Vehicles Built on of after 01-January-2019: MOTROCRAFT Yellow Antifreeze/Coolant Prediluted.. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the King Ranch, 3.0L Eng VIN 1, 4WD configuration.
How much coolant does a 2019 Ford F-150 hold?
The 2019 Ford F-150 cooling system capacity is 13.70 QTS. (12.96 L).
Can I use universal coolant in my 2019 Ford F-150?
It is strongly recommended to use coolant that meets the Vehicles Built on or before 31-December-2018: MOTORCRAFT Orange Antifreeze/Coolant Prediluted. Vehicles Built on of after 01-January-2019: MOTROCRAFT Yellow Antifreeze/Coolant Prediluted. specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
What happens if I use the wrong coolant in my 2019 Ford F-150?
Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.