2016 Bmw X5 Fluid Capacities

OEM fluid capacity chart from the factory service manual for the 2016 (2016).

Quick Answer

Air Cond Compressor Oil (Gas)

β€” PAG ND-OIL 8 Note: See Underhood Decal for oil capacity.

Automatic Transmission Fluid (3.0L Eng,Gas)

8.98 QTS. (8.49 L) β€” Automatic Transmission Fluid ATF+3

Brake Fluid

β€” BMW Brake Fluid DOT 4 with low viscosity

Engine Coolant (3.0L Eng,Gas)

10.88 QTS. (10.29 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).

Engine Oil (sDrive35i,xDrive35i,Gas)

6.90 QTS. (6.52 L) β€” BMW Gasoline Engines. Oil viscosity of 0W-30, LL-01 FE Note: As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity.

Air Cond Compressor Oil (Gas/Electric)

1.60 OZS. (0.04 L) β€” Sanden SP-A2 Note: See Underhood Decal for oil capacity.

Automatic Transmission Fluid (2.0L Eng)

9.19 QTS. (8.69 L) β€” Automatic Transmission Fluid ATF+3

Engine Coolant (2.0L Eng)

2.85 QTS. (2.69 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).

Engine Oil (Gas/Electric)

5.02 QTS. (4.75 L) β€” BMW Gasoline Engines. Oil viscosity of 0W-20, LL-14 FE+ Note: As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity.

Automatic Transmission Fluid (4.4L Eng)

9.19 QTS. (8.69 L) β€” Automatic Transmission Fluid ATF+3

Engine Coolant (4.4L Eng)

15.75 QTS. (14.9 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).

Engine Oil (xDrive50i,Gas)

9.50 QTS. (8.99 L) β€” BMW Gasoline Engines. Oil viscosity of 0W-30, LL-01 FE Note: As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity.

Notes

  • β†’See Underhood Decal for oil capacity.
  • β†’The nameplate in the engine compartment indicates which refrigerant has been used.
  • β†’Approximate capacity.
  • β†’Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
  • β†’As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity.
  • β†’Fill with water and - if required - with a washer antifreeze (according to manufacturer's recommendations). Mix the washer fluid before adding it to the reservoir.
Source: Factory service manual β€” 2016 Bmw X5 2016.

This vehicle's factory manual

The spec is above. This opens the 2016 Bmw factory books so you can go into the X5 procedure.

Open the 2016 Bmw manual

Related for Your 2016 Bmw X5

Frequently Asked Questions

What are the fluid capacities for a 2016 Bmw X5?
The 2016 Bmw X5 fluid capacities are: Air Cond Compressor Oil (Gas): β€” PAG ND-OIL 8 Note: See Underhood Decal for oil capacity., Automatic Transmission Fluid (3.0L Eng,Gas): 8.98 QTS. (8.49 L) β€” Automatic Transmission Fluid ATF+3, Brake Fluid: β€” BMW Brake Fluid DOT 4 with low viscosity, Engine Coolant (3.0L Eng,Gas): 10.88 QTS. (10.29 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)., Engine Oil (sDrive35i,xDrive35i,Gas): 6.90 QTS. (6.52 L) β€” BMW Gasoline Engines. Oil viscosity of 0W-30, LL-01 FE Note: As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity., Air Cond Compressor Oil (Gas/Electric): 1.60 OZS. (0.04 L) β€” Sanden SP-A2 Note: See Underhood Decal for oil capacity., Automatic Transmission Fluid (2.0L Eng): 9.19 QTS. (8.69 L) β€” Automatic Transmission Fluid ATF+3, Engine Coolant (2.0L Eng): 2.85 QTS. (2.69 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)., Engine Oil (Gas/Electric): 5.02 QTS. (4.75 L) β€” BMW Gasoline Engines. Oil viscosity of 0W-20, LL-14 FE+ Note: As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity., Automatic Transmission Fluid (4.4L Eng): 9.19 QTS. (8.69 L) β€” Automatic Transmission Fluid ATF+3, Engine Coolant (4.4L Eng): 15.75 QTS. (14.9 L) β€” Frostox HT-12 antifreeze and corrosion inhibitor Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts)., Engine Oil (xDrive50i,Gas): 9.50 QTS. (8.99 L) β€” BMW Gasoline Engines. Oil viscosity of 0W-30, LL-01 FE Note: As of 7/2015 production, gasoline and diesel engine equipped vehicles have a new engine oil viscosity label (located on underside of engine compartment lid). These engines require a zero weight viscosity engine oil. Approximate capacity..
How much engine oil does a 2016 Bmw X5 take?
The 2016 Bmw X5 takes β€” PAG ND-OIL 8 Note: See Underhood Decal for oil capacity..