Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2016 BMW X5Coolant Type & Capacity
OEM spec from the factory service manual for the sDrive35i variant.
Quick Answer
Coolant Type
Frostox HT-12 antifreeze and corrosion inhibitor
Capacity
10.88 QTS.
10.29 L
Variant
sDrive35i
Note: Top-up quantity of coolant in the event of repair with disconnected collant hoses. Observe the mixture ration and filling level. (2.11 qts).
Source: Factory service manual — 2016 BMW X5 sDrive35i. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of coolant does a 2016 BMW X5 take?
- The 2016 BMW X5 requires Frostox HT-12 antifreeze and corrosion inhibitor. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the sDrive35i configuration.
- How much coolant does a 2016 BMW X5 hold?
- The 2016 BMW X5 cooling system capacity is 10.88 QTS. (10.29 L).
- Can I use universal coolant in my 2016 BMW X5?
- It is strongly recommended to use coolant that meets the Frostox HT-12 antifreeze and corrosion inhibitor specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2016 BMW X5?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.