Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Ford Police Interceptor UtilityOil Type & Capacity
OEM spec from the factory service manual for the 3.5L Eng VIN T variant.
Quick Answer
Oil Type
$MOTORCRAFT Premium Synthetic SAE 5W-20 Motor Oil
Capacity (w/ Filter)
6.00 QTS.
5.67 L
Variant
3.5L Eng VIN T
Note: The engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API certification mark for gasoline engines.
DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
DO NOT use API S category oils labeled as SN, SM, SL or lower category unless the label also displays the API certification mark. These oils do not meet the requirements of the engine and emission system.
This vehicle's factory manual
2014 Ford Police Interceptor Utility: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 2014 Ford Police Interceptor Utility
Frequently Asked Questions
- What type of oil does a 2014 Ford Police Interceptor Utility take?
- The 2014 Ford Police Interceptor Utility requires MOTORCRAFT Premium Synthetic SAE 5W-20 Motor Oil. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 3.5L Eng VIN T configuration.
- How much oil does a 2014 Ford Police Interceptor Utility need?
- The 2014 Ford Police Interceptor Utility takes 6.00 QTS. (5.67 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 2014 Ford Police Interceptor Utility?
- Yes — synthetic oil that meets the MOTORCRAFT Premium Synthetic SAE 5W-20 Motor Oil specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 2014 Ford Police Interceptor Utility?
- Using oil that does not meet the MOTORCRAFT Premium Synthetic SAE 5W-20 Motor Oil specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.