Ford Police Interceptor Utility Fluid Capacities
Factory manual fluid capacities for the Ford Police Interceptor Utility. Exact capacities and specs extracted from the LEMON service manual archive.
Last updated: 2026-10-29 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2024 Ford Police Interceptor Utility: 3.50 OZS. (0.1 L) — MOTORCRAFT R-1234yf Refrigerant PAG Oil/ YN-35 Note: Approximate capacity.
| Generation | Years | Top spec |
|---|---|---|
| 2024 | 2024 | 3.50 OZS. (0.1 L) — MOTORCRAFT R-1234yf Refrigerant PAG Oil/ YN-35 Note: Approximate capacity. |
| 2023 | 2023 | 3.50 OZS. (0.1 L) — MOTORCRAFT R-1234yf Refrigerant PAG Oil/ YN-35 Note: Approximate capacity. |
| 2021-2022 | 2021-2022 | 5.41 OZS. (0.15 L) — PAG 46 |
This vehicle's factory manual
The spec is above. This opens the 2024 Ford Police Interceptor Utility factory book. Use another year if yours is older.
Ford Police Interceptor Utility maintenance schedule
Know the exact fluid capacities job for your Ford Police Interceptor Utility
2024 Ford Police Interceptor Utility: 3.50 OZS. (0.1 L) — MOTORCRAFT R-1234yf Refrigerant PAG Oil/ YN-35 Note: Approximate capacity.
Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Exact Vehicle Check
The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.
2024
- →Approximate capacity.
- →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use of any fluid other than the recommended fluid may cause transmission damage.
- →Add the coolant type originally equipped in the vehicle. Approximate capacity.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil. Approximate capacity.
- →Follow the Manufacturer's Instructions for the mixture ratio.
2023
- →Approximate capacity.
- →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use of any fluid other than the recommended fluid may cause transmission damage.
- →Add the coolant type originally equipped in the vehicle. Approximate capacity.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil. Approximate capacity.
- →Follow the Manufacturer's Instructions for the mixture ratio.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil. Approximate capacity.
2021-2022
- →Approximate capacity.
- →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use of any fluid other than the recommended fluid may cause transmission damage.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add the coolant type originally equipped in the vehicle.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
- →Follow the Manufacturer's Instructions for the mixture ratio.
2020
- →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use of any fluid other than the recommended fluid may cause transmission damage.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add the coolant type originally equipped in the vehicle.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
- →Follow the Manufacturer's Instructions for the mixture ratio.
2019
- →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use of any fluid other than the recommended fluid may cause transmission damage.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
- →Add the coolant type originally equipped in the vehicle.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil.
- →Follow the Manufacturer's Instructions for the mixture ratio.
2018
- →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use of any fluid other than the recommended fluid may cause transmission damage.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
- →Add the coolant type originally equipped in the vehicle.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil.
- →Follow the Manufacturer's Instructions for the mixture ratio.
2017
- →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use of any fluid other than the recommended fluid may cause transmission damage.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
- →Add the coolant type originally equipped in the vehicle.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-30 Synthetic Blend Motor Oil.
- →To improve engine cold start performance use: MOTORCRAFT SAE 0W-20 Synthetic Blend Motor Oil.
- →Follow the Manufacturer's Instructions for the mixture ratio.
2016
- →Indicates only approximate dry-fill capacity. Some applications may vary based on cooler size and if equipped with an in-tank cooler. The amount of transmission fluid and fluid level should be set by the indication on the dipstick's normal operating range. Use of any fluid other than the recommended fluid may cause transmission damage.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
- →Add the coolant type originally equipped in the vehicle.
- →Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
- →Follow the Manufacturer's Instructions for the mixture ratio.
2015
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
- →Add the coolant type originally equipped in the vehicle.
- →Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specification. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API Certification Mark. Do not use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage that is not covered by your Ford warranty. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty.
- →Follow the Manufacturer's Instructions for the mixture ratio.
Manual already checked Amazon for you
You came here for the exact spec. Now here is the exact part — plus the two things people always forget and have to run back to the store for.
Ford Police Interceptor Utility Fluid Service Kit
Buy all the fluids your Ford Police Interceptor Utility needs in one cart.
We earn a small commission if you buy through these links — at zero extra cost to you. We only suggest items that match the factory specs on this page.
Fluids — Manual's Parts List
Everything for a full fluid service weekend.
- 1Engine OilShop →
Match viscosity to your spec
- 2CoolantShop →
Match color/chemistry — never mix types
- 3Long-Neck FunnelShop →
Transmission and differential fill holes are recessed
- 4Fluid Extraction PumpShop →
Remove old brake fluid from reservoir without mess
- 5Shop RagsShop →
You will need more than you think
Get everything at once
One search shows all of the above on a single page.
Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
Fluid Extraction Pump
Cleanly remove old fluids from reservoirs.
Clean Shop Rags
Lint-free rags for cleaning dipsticks and spills.
Multi-Purpose Funnel
Long-neck funnel for hard-to-reach fill points.
Nitrile Gloves
Keep hands clean during multi-fluid maintenance.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your Ford Police Interceptor Utility so the job is ready when the parts arrive.
Frequently Asked Questions
- Where is this data from?
- Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
- What fluid capacities does a Ford Police Interceptor Utility use?
- 2024 Ford Police Interceptor Utility: 3.50 OZS. (0.1 L) — MOTORCRAFT R-1234yf Refrigerant PAG Oil/ YN-35 Note: Approximate capacity.
- Why do fluid capacities vary by generation for the Ford Police Interceptor Utility?
- Different engine options, transmission types, and cooling system designs across model years change total fluid volumes. Always use the capacity listed for your exact year and engine code — do not guess across generations.
Get the Complete Maintenance Schedule for Ford Police Interceptor Utility
Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.
Not sure you want to DIY? Compare local shop pricing first.
Author & Review
Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.
Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.
Last updated: 2026-10-29
