Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
2014 Ford Police Interceptor UtilityCoolant Type & Capacity
OEM spec from the factory service manual for the 3.5L Eng VIN T variant.
Quick Answer
Coolant Type
MOTORCRAFT Orange Antifreeze/Coolant Prediluted
Capacity
11.50 QTS.
10.88 L
Variant
3.5L Eng VIN T
Note: Add the coolant type originally equipped in the vehicle.
This vehicle's factory manual
2014 Ford Police Interceptor Utility: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
What You'll Need
Related for Your 2014 Ford Police Interceptor Utility
Frequently Asked Questions
- What type of coolant does a 2014 Ford Police Interceptor Utility take?
- The 2014 Ford Police Interceptor Utility requires MOTORCRAFT Orange Antifreeze/Coolant Prediluted. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 3.5L Eng VIN T configuration.
- How much coolant does a 2014 Ford Police Interceptor Utility hold?
- The 2014 Ford Police Interceptor Utility cooling system capacity is 11.50 QTS. (10.88 L).
- Can I use universal coolant in my 2014 Ford Police Interceptor Utility?
- It is strongly recommended to use coolant that meets the MOTORCRAFT Orange Antifreeze/Coolant Prediluted specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 2014 Ford Police Interceptor Utility?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.