2013 Chevrolet EquinoxOil Type & Capacity

Example source row for the LT, 2.4L Eng VIN K, AWD, Gas variant. This is not a confirmed match for your vehicle; check the engine, trim and procedure before filling.

Quick Answer

Oil Type

API - SAE 5W-30

Source quantity

5.00 QTS.

4.73 L

Operation: w/Filter

Variant

LT, 2.4L Eng VIN K, AWD, Gas

Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.

This vehicle's factory manual

2013 Chevrolet Equinox: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.

Search for oil-change supplies

These links open Amazon searches. Confirm your vehicle, oil specification and filter fit before ordering.

As an Amazon Associate, AllOEMManuals earns from qualifying purchases.

Related for Your 2013 Chevrolet Equinox

Frequently Asked Questions

What oil is listed for the 2013 Chevrolet Equinox?
The source row for the LT, 2.4L Eng VIN K, AWD, Gas example lists API - SAE 5W-30. Confirm the engine and oil specification in the manual for your own vehicle.
How much oil is listed for the 2013 Chevrolet Equinox?
The source row for the LT, 2.4L Eng VIN K, AWD, Gas example lists 5.00 QTS. (4.73 L). The listed operation is w/Filter. Confirm the service procedure and check the oil level.
Can I use synthetic oil in my 2013 Chevrolet Equinox?
Check your vehicle's manual and the oil container for the required viscosity and approval or certification. Do not assume every synthetic oil is suitable.