🧪Fluid Capacities

Chevrolet Equinox Fluid Capacities

Factory manual fluid capacities for the Chevrolet Equinox. Exact capacities and specs extracted from the LEMON service manual archive.

Last updated: 2026-10-29 • Reading time: 8 min • By AllOEMManuals Editorial Team

Quick Answer

2022-2024 Chevrolet Equinox: 5.01 OZS. (0.14 L) — PAG 46

GenerationYearsTop spec
2022-20242022-20245.01 OZS. (0.14 L) — PAG 46
202120215.01 OZS. (0.14 L) — PAG 46
202020205.01 OZS. (0.14 L) — PAG 46

This vehicle's factory manual

The spec is above. This opens the 2022 Chevrolet Equinox factory book. Use another year if yours is older.

Open the 2022 Chevrolet manual

Chevrolet Equinox maintenance schedule

Factory Manual ConfirmationFluid Capacities

Know the exact fluid capacities job for your Chevrolet Equinox

2022-2024 Chevrolet Equinox: 5.01 OZS. (0.14 L) — PAG 46

Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.

Exact Vehicle Check

The button opens the factory book for this vehicle. Use the engine picker only when your trim is not the one this page already matched.

Open the factory manual above to confirm the exact engine before ordering parts.

2022-2024

Air Cond Compressor Oil5.01 OZS. (0.14 L) — PAG 46
Air Cond Refrigerant1.10 LBS. (0.49 KG) — R-134a
Automatic Transmission Fluid— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3 - 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Brake Fluid— DOT 3 Hydraulic Brake Fluid
Differential Gear Oil0.79 QTS. (0.74 L) — DEXRON LS Hypoid Fluid Note: Correct fill level is 0 to 10mm (0.39in) below the fill plug hole.
Engine Coolant7.00 QTS. (6.62 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (4WD)5.30 QTS. (5.01 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
Fuel Tank (4WD)15.60 GALS. (59.05 L)
Transfer Case Fluid0.53 QTS. (0.5 L) — Transfer Case Fluid Note: GM Part No. 88900401.
Windshield Washer Fluid— Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Engine Oil (FWD)4.20 QTS. (3.97 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
Fuel Tank (FWD)14.80 GALS. (56.02 L)
Notes
  • →Fluid Capacity is between: 4.2 - 6.3 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 8.5 - 9.0 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 5.3 - 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Correct fill level is to the bottom of the fill plug hole.
  • →Correct fill level is 0 to 10mm (0.39in) below the fill plug hole.
  • →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
  • →GM Part No. 88900401.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Air Cond Compressor Oil5.01 OZS. (0.14 L) — PAG 46
Air Cond Refrigerant1.10 LBS. (0.49 KG) — R-134a
Automatic Transmission Fluid— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3 - 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Brake Fluid— DOT 3 Hydraulic Brake Fluid
Differential Gear Oil0.79 QTS. (0.74 L) — DEXRON LS Hypoid Fluid Note: Correct fill level is 0 to 10mm (0.39in) below the fill plug hole.
Engine Coolant7.00 QTS. (6.62 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (FWD)4.20 QTS. (3.97 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
Fuel Tank (FWD)14.80 GALS. (56.02 L)
Transfer Case Fluid0.53 QTS. (0.5 L) — Transfer Case Fluid Note: GM Part No. 88900401.
Windshield Washer Fluid— Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Engine Oil (4WD)5.30 QTS. (5.01 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
Fuel Tank (4WD)15.60 GALS. (59.05 L)
Notes
  • →Fluid Capacity is between: 4.2 - 6.3 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 8.5 - 9.0 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 5.3 - 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Correct fill level is to the bottom of the fill plug hole.
  • →Correct fill level is 0 to 10mm (0.39in) below the fill plug hole.
  • →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
  • →GM Part No. 88900401.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Air Cond Compressor Oil5.01 OZS. (0.14 L) — PAG 46
Air Cond Refrigerant1.10 LBS. (0.49 KG) — R-134a
Automatic Transmission Fluid (1.5L Eng)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Brake Fluid— DOT 3 Hydraulic Brake Fluid
Differential Gear Oil0.79 QTS. (0.74 L) — DEXRON LS Hypoid Fluid Note: Correct fill level is 0 to 10mm (0.39in) below the fill plug hole.
Engine Coolant (1.5L Eng)7.00 QTS. (6.62 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (1.5L Eng,FWD)4.20 QTS. (3.97 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
Fuel Tank (FWD)14.80 GALS. (56.02 L)
Transfer Case Fluid0.53 QTS. (0.5 L) — Transfer Case Fluid Note: GM Part No. 88900401.
Windshield Washer Fluid— Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Engine Oil (1.5L Eng,4WD)5.30 QTS. (5.01 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
Fuel Tank (4WD)15.60 GALS. (59.05 L)
Automatic Transmission Fluid (2.0L Eng)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 9.0 - 10 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Coolant (2.0L Eng)8.20 QTS. (7.76 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (2.0L Eng,4WD)6.00 QTS. (5.67 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Engine Oil (2.0L Eng,FWD)5.00 QTS. (4.73 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Notes
  • →Fluid Capacity is between: 4.2 to 6.3 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 8.5 to 9.0 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Correct fill level is to the bottom of the fill plug hole.
  • →Correct fill level is 0 to 10mm (0.39in) below the fill plug hole.
  • →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
  • →GM Part No. 88900401.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
  • →Fluid Capacity is between: 5.3 - 6.3 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 9.0 - 10 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.

2018-2019

Air Cond Compressor Oil5.01 OZS. (0.14 L) — PAG 46
Air Cond Refrigerant1.10 LBS. (0.49 KG) — R-134a
Automatic Transmission Fluid (1.5L Eng)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Brake Fluid— DOT 3 Hydraulic Brake Fluid
Diesel Exhaust Fluid— Deisel Exhaust Fluid or diesel exhaust fluid that meets ISO 2224-1 of displays the API Diesel Exhaust Fluid Certification
Differential Gear Oil0.79 QTS. (0.74 L) — DEXRON LS Hypoid Fluid Note: Correct fill level is 0 to 10mm (0.39in) below the fill plug hole.
Engine Coolant (1.5L Eng)7.00 QTS. (6.62 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (1.5L Eng,FWD)4.20 QTS. (3.97 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
Fuel Tank (FWD)14.80 GALS. (56.02 L)
Transfer Case Fluid0.53 QTS. (0.5 L) — Transfer Case Fluid Note: GM Part No. 88900401.
Windshield Washer Fluid— Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Engine Oil (1.5L Eng,4WD)5.30 QTS. (5.01 L) — API - SAE 0W-20 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
Fuel Tank (4WD)15.60 GALS. (59.05 L)
Automatic Transmission Fluid (1.6L Eng)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Coolant (1.6L Eng)7.90 QTS. (7.47 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (1.6L Eng)5.28 QTS. (4.99 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos 2 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos2 Synthetic Blend is recommended. If your vehicle is operated in an area where the temperature falls below -29Deg.C (-20Deg.F), consider using a SAE 0W-40 oil, it will provide easier cold starting and better protection for the engine at extremely low temperatures.
Automatic Transmission Fluid (2.0L Eng)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 2.1 to 3.2 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Coolant (2.0L Eng)8.20 QTS. (7.76 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (2.0L Eng,4WD)6.00 QTS. (5.67 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Engine Oil (2.0L Eng,FWD)5.00 QTS. (4.73 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Notes
  • →Fluid Capacity is between: 4.2 to 6.3 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 8.5 to 9.0 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Correct fill level is to the bottom of the fill plug hole.
  • →Correct fill level is 0 to 10mm (0.39in) below the fill plug hole.
  • →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended.
  • →GM Part No. 88900401.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
  • →Use only engine oil licensed to the dexos 2 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos2 Synthetic Blend is recommended. If your vehicle is operated in an area where the temperature falls below -29Deg.C (-20Deg.F), consider using a SAE 0W-40 oil, it will provide easier cold starting and better protection for the engine at extremely low temperatures.
  • →Fluid Capacity is between: 5.3 - 6.3 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 9.0 - 10 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 2.1 to 3.2 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Air Cond Compressor Oil5.00 OZS. (0.14 L) — PAG 46
Air Cond Refrigerant1.43 LBS. (0.64 KG) — R-134a
Automatic Transmission Fluid (2.4L Eng)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Brake Fluid— DOT 3 Hydraulic Brake Fluid
Engine Coolant (2.4L Eng)8.20 QTS. (7.76 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (2.4L Eng)5.00 QTS. (4.73 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Fuel Tank (2.4L Eng)18.80 GALS. (71.16 L)
Transfer Case Fluid0.85 QTS. (0.8 L) — Synthetic Lubricant - Transfer Case SAE 75W-90
Windshield Washer Fluid— Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Automatic Transmission Fluid (3.6L Eng)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Coolant (3.6L Eng)10.80 QTS. (10.22 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (3.6L Eng)6.00 QTS. (5.67 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Fuel Tank (3.6L Eng)20.90 GALS. (79.11 L)
Power Steering Fluid (3.6L Eng)2.20 PTS. (1.04 L) — Automatic Transmission Fluid DEXRON VI
Notes
  • →Fluid Capacity is between: 4.2 to 6.3 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 8.5 to 9.0 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
  • →Fluid Capacity is between: 7.4 - 9.5 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.

2015-2016

Air Cond Compressor Oil5.00 OZS. (0.14 L) — PAG 46
Air Cond Refrigerant1.43 LBS. (0.64 KG) — R-134a
Automatic Transmission Fluid (2.4L Eng)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Brake Fluid— DOT 3 Hydraulic Brake Fluid
Differential Gear Oil0.53 QTS. (0.5 L) — SAE 75W-90 Synthetic Axle Gear Oil Note: GM Part No. 89021677.
Engine Coolant (2.4L Eng)8.20 QTS. (7.76 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (2.4L Eng)5.00 QTS. (4.73 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Fuel Tank (2.4L Eng)18.80 GALS. (71.16 L)
Transfer Case Fluid1.06 QTS. (1 L) — Synthetic Lubricant - Transfer Case SAE 75W-90
Windshield Washer Fluid— Windshield Washer Fluid Note: Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
Automatic Transmission Fluid (3.6L Eng)— Automatic Transmission Fluid DEXRON VI Note: Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Coolant (3.6L Eng)10.80 QTS. (10.22 L) — 50/50 mixture of DEX-COOL and clean, drinkable water Note: All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
Engine Oil (3.6L Eng)6.00 QTS. (5.67 L) — API - SAE 5W-30 Note: Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
Fuel Tank (3.6L Eng)20.90 GALS. (79.11 L)
Power Steering Fluid (3.6L Eng)2.20 PTS. (1.04 L) — Automatic Transmission Fluid DEXRON VI
Notes
  • →Fluid Capacity is between: 4.2 to 6.3 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 8.5 to 9.0 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Fluid Capacity is between: 5.3 to 7.4 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →GM Part No. 89021677.
  • →All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.
  • →Use only engine oil licensed to the dexos1 specification, or equivalent, of the proper SAE viscosity grade. ACDelco dexos1 Synthetic Blend is recommended. If in an area of extreme cold, where the temperature falls below -20Deg.F (-29Deg.C), an SAE 0W-30 oil may be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures.
  • →Follow the Manufacturer's Instructions for the mixture ratio. Automotive windshield washer fluid that meets regional freeze protection requirements.
  • →Fluid Capacity is between: 7.4 - 9.5 qts. All capacities are approximate. When adding, be sure to fill to the approximate level. Recheck the fluid level after filling.

Manual already checked Amazon for you

You came here for the exact spec. Now here is the exact part — plus the two things people always forget and have to run back to the store for.

The Exact Part
Verified Fit

Chevrolet Equinox Fluid Service Kit

Buy all the fluids your Chevrolet Equinox needs in one cart.

We earn a small commission if you buy through these links — at zero extra cost to you. We only suggest items that match the factory specs on this page.

Fluids — Manual's Parts List

Everything for a full fluid service weekend.

Vehicle-Scoped Amazon Search

Opens Amazon with Chevrolet Equinox prefilled so you can confirm fitment and avoid wrong parts.

Check Fitment on Amazon

Get everything at once

One search shows all of the above on a single page.

See All on Amazon

Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.

One-Trip Shopping List

Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.

Frequently Asked Questions

Where is this data from?
Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
What fluid capacities does a Chevrolet Equinox use?
2022-2024 Chevrolet Equinox: 5.01 OZS. (0.14 L) — PAG 46
Why do fluid capacities vary by generation for the Chevrolet Equinox?
Different engine options, transmission types, and cooling system designs across model years change total fluid volumes. Always use the capacity listed for your exact year and engine code — do not guess across generations.

Get the Complete Maintenance Schedule for Chevrolet Equinox

Oil, filters, belts, brakes, and fluid intervals sent to your inbox. Unsubscribe anytime.

Not sure you want to DIY? Compare local shop pricing first.

Author & Review

Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.

Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.

Last updated: 2026-10-29

Need a full step-by-step repair guide?

Start Free AI Diagnosis →

100% Free — No signup required